How To Clean Your Dryer Vent And 7 Mistakes To Avoid – Pointloaded
September 21, 2021
How To Clean Your Dryer Vent And 7 Mistakes To Avoid &Ndash; Pointloaded

How To Clean Your Dryer Vent And 7 Mistakes To Avoid

Dryer is a home or household appliance that removes the water from clothing by accelerating evaporation, usually through heat and a tumbling motion.

The fire that emanates from dryers are a very real and hazardous, and this fire mostly originates in the metal tube between your dryer and the wall. That’s what you need to clean out. Doing that will help your dryer last longer and work efficiently.

Proper cleaning of the dryer vent goes way beyond wiping off the lint filter between loads. And if you do not do it, your house could catch fire.

Here are how to clean your dryer vent and 7 mistakes to avoid:

1. Don’t bend the duct too much

Dryers ducts can bend moderately easily when handled, which you will want to prevent. When you reattach the duct to the dryer, make sure there are no sharp turns or bends in the tube, which will create cracks for lint to accumulate and may lead to breaks.

When you are cleaning the duct, take the opportunity to go over its surface to check for cracks or tears. Patching them up will help your dryer run optimally and prolong its lifespan.

2.  Don’t reattach the duct with duct tape

Don’t try to reattach the duct with a duct tape, using the duct tape isn’t advisable because It can destroy from the heat of the dryer. So, you should use aluminium tape, which can take the dryer heat.

3. Don’t forget to unplug the dryer

Before you begin cleaning the dryer vent, you must unplug the machine’s power cord from the wall outlet or power source to avoid getting shocked. If you are using a gas-powered appliance, make sure you turn off the gas supply to prevent leaks and fire hazard.

4. Using the wrong equipment

Little dryer lint fibres can cling to the walls of the duct, so it is worth investing in equipment that does the job right. The Lint Lizard which attaches to the end of your vacuum cleaner and is very good at sucking up dryer debris.

5. Attempting to clean a long vent yourself

Some basic equipment and skills should work for most homes but hiring a professional if your dryer has a long duct is the best thing to do.

6. Overlooking moisture detector or sensor

If your dryer has a moisture detector or sensor, keeping it clean always will help your dryer work efficiently. So, you might as well do it while you’re working on the vent. The detector is like a thin metal bar that is often fixed right below the dryer door. You can remove the lint, dryer-sheet chemicals, and another residue with a cotton ball and rubbing alcohol so the sensor function efficiently without hitch.

While it has nothing to do with your actual vent, if your dryer has a moisture sensor, keeping it clean will help your dryer function efficiently. So, you might as well do it while you are working on the vent.

7. Routing the vent into a crawlspace

The lint that accumulates in your dryer vent is very flammable. There is only one place the exhaust should be going to maintain dryer vent safety, and that’s outdoors. Always clean your dryer vent, and leave any crucial work, such as rerouting the vent, to the professionals. These will go a long way in ameliorating fire incident that emanates from the dryer vent.

Share this post